1100 1200 stucco embossed aluminum alloy plate

China Supplier：Signi Aluminium

Author ：frank

Guide ：1100 ， 1200 stucco embossed aluminum alloy plate 1100 stucco embossed aluminum alloy plate...

1100，1200 stucco embossed aluminum alloy plate

1100 stucco embossed aluminum alloy plate
The 2# stucco embossed sheet made of 1100 alloy, supplied in H14, and the substrate (embossed plate) is 2000mm in thickness:
2# stucco embossed aluminum alloy plate 1100-H14 1.0×1000×2000 YS/T490-2005

1200 stucco embossed aluminum alloy plate
The 1# stucco embossed sheet made of 1200 alloy, supplied in H14, and the substrate (embossed plate) is 900mm in thickness:
1#stucco embossed aluminum alloy plate 1100-H14 0.8×900 YS/T490-2005
The length allowable deviation of stucco embossed aluminum alloy plate is ±3mm.
The diagonal deviation of stucco embossed aluminum alloy plate is not greater than 6mm.
The surface of stucco embossed sheet should be clean, no cracks, cracks, corrosion and other defects are allowed.
Anodizing embossing plate surface does not allow the rainbow phenomenon and double water wave.
The surface of the stucco embossed sheet allows for slight scratches.
Cuoceng strip is not greater than 5mm, the tower is not greater than 10mm, the joint is not allowed, if there are special requirements shall be negotiated between the two parties.
The chemical composition, size deviation and appearance quality of each batch of products should be checked before leaving the factory. The base material should be tested for mechanical properties. The local thickness of oxide film should be checked for anodic oxidation embossing plate.